Shell Tonna S3 M 220 / D209L

Shell Tonna S3 M 220 / D209L

Regular price

ISO VG 68 and 220.
Shell Tonna S3 M Oils are specially designed for the lubrication of machine tool slides and tables. They are based on highly refined mineral oils and contain additives to enhance tackiness, anti-wear and stick-slip characteristics. They are specially recommended in cases where high precision and low speed machines are used as well as where there are combined lubrication systems.

MAIN APPLICATIONS
MACHINE TOOL SLIDE WAYS, TABLES AND FEED MECHANISMS
Developed for use on a wide range of materials used for machine tool slide way surfaces, including cast iron and synthetic materials.
MACHINE TOOL HYDRAULIC SYSTEMS
Particularly recommended for machines which have a combined hydraulic and slide way lubrication system.
MACHINE TOOL GEARBOXES AND SPINDLES
Also suitable for gear and headstock lubrication. The lower viscosity grades are intended for horizontal slide lubrication (Tonna S 3 M 68): For vertical slides use Tonna S 3 M 220.
Advice on applications not covered in this leaflet may be obtained from your Shell representative.

SPECIFICATIONS
• Tonna S meets the following specifications:
• ISO 11158 / ISO 6743-4 HG.
• ISO 12925-1 / ISO 6743-6 CKC.
• ISO 19378 / ISO 6743-13
GA and GB.
• Cincinnati Machine P-50 (ISO VG 220), P-47 (ISO VG 68).
• CGLP Slideway Oil against DIN 51502.

PACK SIZES
• Tonna S3 M 220
• 20L pail.
• 209L drum.
• Tonna S3 M 68
• 20L pail.
• 209L drum.

You do not have a link list with a handle set to , or you do and it's empty. Go ahead and create a link list called on your Navigation page and populate that link list with links that point to collections, to see collections listed here. Make sure the link list also has a handle set to .