Shell Tonna S3 M 68 / P20L

Shell Tonna S3 M 68 / P20L

Regular price

*Price includes GST


Shell Tonna S3 M 68 / P20L
  • DESCRIPTION
    • ISO VG 68 and 220.
      Shell Tonna S3 M Oils are specially designed for the lubrication of machine tool slides and tables. They are based on highly refined mineral oils and contain additives to enhance tackiness, anti-wear and stick-slip characteristics. They are specially recommended in cases where high precision and low speed machines are used as well as where there are combined lubrication systems.

  • MAIN APPLICATIONS
    • MACHINE TOOL SLIDE WAYS, TABLES AND FEED MECHANISMS
      Developed for use on a wide range of materials used for machine tool slide way surfaces, including cast iron and synthetic materials.

      MACHINE TOOL HYDRAULIC SYSTEMS
      Particularly recommended for machines which have a combined hydraulic and slide way lubrication system.

      MACHINE TOOL GEARBOXES AND SPINDLES
      Also suitable for gear and headstock lubrication. The lower viscosity grades are intended for horizontal slide lubrication (Tonna S 3 M 68): For vertical slides use Tonna S 3 M 220.
      Advice on applications not covered in this leaflet may be obtained from your Shell representative.

  • SPECIFICATIONS
    • Tonna S meets the following specifications:
      • ISO 11158 / ISO 6743-4 HG.
      • ISO 12925-1 / ISO 6743-6 CKC.
      • ISO 19378 / ISO 6743-13 GA and GB.
      • Cincinnati Machine P-50 (ISO VG 220), P-47 (ISO VG 68).
      • CGLP Slideway Oil against DIN 51502.
  • PACK SIZES
      • 20L pail.
      • 209L drum.